1. High power milling cutter, mirror cutter disk, strong motor, high concentricity, smooth milling.
2. High-power Bosch drill is adopted for milling motor, which is strong and strong without slipping
3. The milling cutter is equipped with a limited position switch, which can be rotated only when placed in the frame to prevent accidental injury.
Preparation
Preparation for welding HDPE Pipe manual Butt Fusion Welding Machine 1. Before operation, all equipment parts shall be placed on a stable and dry place. 2. Confirm that the power supply used meets the requirements of the equipment, the equipment is in good condition, and the electrical circuit is not damaged; the detection indicator works normally, the milling cutter blade is sharp, and the parts and operating tools are complete. 3. Replace the required fixture according to the outer diameter of the welded pipe.
Notice
Common problems of various components of the hot melt machine when connecting PE pipes: 1. The maximum temperature of the heating plate of the heating plate reaches 250 °C, so be sure to pay attention to the following categories: ① Wear anti-cutting gloves ② Pay attention to the safety precautions of the actual operating staff. After the welding is completed, it should be placed in a special heating plate support frame. ③ The heating plate should be cooled before transportation to prevent fire. ④ After the electric welding is completed, put the heating plate in a safe area to prevent others from accidentally touching the burn. ⑤ Grasp the door handle when lifting the heating plate. Do not disconnect the switching power supply of the heating plate ⑧ Remember not to touch the heating plate with force 2. Milling cutter ① Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and free of dirt to prevent damage to the cutting blade ② Pipe (piece) cutting After the end, after the milling cutter disc stops rotating, take out the milling cutter disc and store it. ③ Hold the door handle when obtaining the milling cutter disc. ④ The milling cutter disc can only be rotated when it is installed on the welding frame. Do not arbitrarily adjust the toggle switch of the milling cutter. 4. Frame ① Check the parts/materials to be welded to ensure that they are accurately clamped on the frame , to ensure the welding quality of electric welding. When heating, the actual operating staff should stand off the welding machine moderately. ② During electric welding, if the movable chuck and the fixed chuck collide, it is not necessary to use the main gate of the welding machine to shut down, only move the work The pressure adjustment lever can open the chuck. ③ When transporting the rack, make sure that the chucks are all tightened to prevent them from falling off.
FAQ
1. Who are we?
We are professional plumbing tools company located in Zhuji city of China, we are close to Port Shanghai, Ningbo and Yiwu. We mainly sell to North America, Europe and the Middle East countries. Our client are tools wholesaler and comnpany for specific constrution project such as fire fighting pipeline building etc.
2. How can we guarantee the quality?
We will test at least one pipes on every machine before shipping out.
Some of our heavy duty models works well after even 7 or 8 years according to our client feedback, for all of our machine we offer one year warranty.
3. What can you buy from us?
All kind of pipe tools and plumbing tools, such as pipe welding machine, pipe cutters, as well as the test pump.
4. Why should you buy from us not from other suppliers?
We focus on quality piping tools and machinery and service.
We have almost all kind of pipe tools, place order to us we can mix various models in one shipment.
Speaking:English,Spanish,Japanese,Portuguese,German,Arabic,
French,Russian,Korean,Hindi,Italian
5. How long is the leadtime?
Since the voltage of machine motor are customized, usually the lead time will be 30 days after payment.
